东莞哪里有网站建设厂家网络推广平台有哪些渠道

操作系统版本：Ubuntu 20.04.5
suricata版本： suricata-7.0.0-rc1

suricata是一个基于规则的入侵检测和防御引擎，功能强大，但性能可能 差强人意，不过目前最新的7版本已经支持DPDK收包了，DPDK是Intel提供的高性能网络收发包开源库，可想而知，suricata支持DPDK收包会带来性能的极大提升。

下面我们来看一下，如何安装基于DPDK收发包的suricata：
1、安装依赖包：
sudo apt-get -y install autoconf automake libtool && sudo apt-get -y install pkg-config && sudo apt-get -y install zlib1g-dev && apt install -y libpcre2-dev && apt install -y libpcre3-dev && apt-get -y install libyaml-dev && apt install -y libjansson-dev && apt install -y libpcap-dev && apt-get -y install libmagic-dev && apt-get -y install liblz4-dev && apt-get -y install libcap-ng-dev && apt -y install rustc cargo && sudo apt-get install -y libnet-dev && cargo install --force cbindgen

2、安装DPDK开发库：
apt-get install dpdk-dev
如果dpdk下载的版本太低（suricata支持的DPDK最低版本为19.11），需要更新apt的源，即修改/etc/apt/sources.list文件。
当然也可以下载自己想安装的DPDK版本，然后按照安装步骤把DPDK先安装好。DPDK的安装步骤可以参照之前的文章：DPDK的源码编译安装

3、下载igb_uio驱动并编译驱动：
git clone git://dpdk.org/dpdk-kmods
cd dpdk-kmods/linux/igb_uio
make
成功编译后，可以看到生成了igb_uio.ko驱动文件，后面会加载这个文件。

4、如果想使用Hyperscan来进行模式匹配，还需要事先安装好Hyperscan：
Hyperscan的安装步骤可以参照之前的文章：Hyperscan的源码编译安装

5、从github上下载suricata源码
git clone https://github.com/OISF/suricata.git suricata-7.0.0-rc1

6、切换到7.0.0-rc1版本：
cd suricata-7.0.0-rc1
git checkout suricata-7.0.0-rc1

7、从github下载http解析库libhtp，并生成Makefile:
git clone https://github.com/OISF/libhtp
cd libhtp
./autogen.sh
./configure --enable-rust=yes --enable-gccmarch-native=no CPPFLAGS=-I/usr/include/ CFLAGS=-g
cd …

8、编译和安装suricata:
./autogen.sh
./configure --enable-rust=yes --enable-gccmarch-native=no --enable-dpdk=yes --enable-libmagic=yes CPPFLAGS=-I/usr/include/ CFLAGS=-g
make -j
make install
make install-conf
make install-full

9、下载suricata规则：
sudo apt install -y python3-pip python-yaml
sudo pip install --upgrade suricata-update
suricata-update

10、检查编译的suricata是否支持DPDK:
suricata --build-info

11、修改suricata DPDK收包网卡配置：
先用lshw -C network -businfo命令找到网卡的pcie地址，然后在/usr/local/etc/suricata/suricata.yaml文件中配置suricata DPDK收包，主要修改interface和copy-iface配置。

dpdk:eal-params:proc-type: primary# DPDK capture support# RX queues (and TX queues in IPS mode) are assigned to cores in 1:1 ratiointerfaces:- interface: 0000:0b:00.0 # PCIe address of the NIC port# Threading: possible values are either "auto" or number of threads# - auto takes all cores# in IPS mode it is required to specify the number of cores and the numbers on both interfaces must matchthreads: 1promisc: true # promiscuous mode - capture all packetsmulticast: true # enables also detection on multicast packetschecksum-checks: true # if Suricata should validate checksumschecksum-checks-offload: false # if possible offload checksum validation to the NIC (saves Suricata resources)mtu: 1500 # Set MTU of the device in bytes# rss-hash-functions: 0x0 # advanced configuration option, use only if you use untested NIC card and experience RSS warnings,# For `rss-hash-functions` use hexadecimal 0x01ab format to specify RSS hash function flags - DumpRssFlags can help (you can see output if you use -vvv option during Suri startup)# setting auto to rss_hf sets the default RSS hash functions (based on IP addresses)# To approximately calculate required amount of space (in bytes) for interface's mempool: mempool-size * mtu# Make sure you have enough allocated hugepages.# The optimum size for the packet memory pool (in terms of memory usage) is power of two minus one: n = (2^q - 1)mempool-size: 65535 # The number of elements in the mbuf pool# Mempool cache size must be lower or equal to:#     - RTE_MEMPOOL_CACHE_MAX_SIZE (by default 512) and#     - "mempool-size / 1.5"# It is advised to choose cache_size to have "mempool-size modulo cache_size == 0".# If this is not the case, some elements will always stay in the pool and will never be used.# The cache can be disabled if the cache_size argument is set to 0, can be useful to avoid losing objects in cache# If the value is empty or set to "auto", Suricata will attempt to set cache size of the mempool to a value# that matches the previously mentioned recommendationsmempool-cache-size: 257rx-descriptors: 1024tx-descriptors: 1024## IPS mode for Suricata works in 3 modes - none, tap, ips# - none: IDS mode only - disables IPS functionality (does not further forward packets)# - tap: forwards all packets and generates alerts (omits DROP action) This is not DPDK TAP# - ips: the same as tap mode but it also drops packets that are flagged by rules to be droppedcopy-mode: ipscopy-iface: 0000:13:00.0 # or PCIe address of the second interface- interface: 0000:13:00.0threads: 1promisc: truemulticast: truechecksum-checks: truechecksum-checks-offload: falsemtu: 1500#rss-hash-functions: automempool-size: 65535mempool-cache-size: 257rx-descriptors: 1024tx-descriptors: 1024copy-mode: ipscopy-iface: 0000:0b:00.0

12、配置DPDK大页内存：
在/etc/default/grub中添加GRUB_CMDLINE_LINUX=“net.ifnames=0 biosdevname=0 default_hugepagesz=2M hugepagesz=2M hugepages=2048”，也可以根据CPU的配置为1G大页。

重新生成grub配置文件： grub-mkconfig -o /boot/grub/grub.cfg

13、查看大页内存是否生效：
reboot重启系统后，使用grep Huge /proc/meminfo查看大页内存配置

14、加载igb_uio驱动，并绑定网卡使用igb_uio驱动：
modprobe uio
insmod dpdk-kmods/linux/igb_uio/igb_uio.ko
先使用dpdk-devbind.py -s查看网卡驱动绑定情况：

绑定两张网卡使用igb_uio驱动：
dpdk-devbind.py -b igb_uio 0000:0b:00.0
dpdk-devbind.py -b igb_uio 0000:13:00.0

15、运行suricata：
至此，DPDK和suricata的运行环境都已经配置好了，我们现在使用suricata --dpdk来启动suricata试试：

OK，大功告成，我们已经成功迈出了学习研究suricata的第一步。
如果想测试下DPDK收发包是否正常，可以让刚刚DPDK收包指定的两个网卡分别连上两台主机，并配置同网段的IP地址，看两台主机能否互相访问。