当前位置： 首页 > news >正文

山东临沂网站设计公司广告公司

news 2026/4/6 9:32:50
山东临沂网站设计公司,广告公司,网站空间会过期吗,郑州网站建设公司qq你好，这里是网络技术联盟站。 昨天给大家介绍了10个华为交换机的Python脚本： 10个华为华为交换机常用的Python脚本，网络工程师收藏！ 大家反响不错，后期我会陆续出一下思科、H3C、锐捷等厂商的脚本，前期会…

你好，这里是网络技术联盟站。

昨天给大家介绍了10个华为交换机的Python脚本：

  • 10个华为华为交换机常用的Python脚本，网络工程师收藏！

大家反响不错，后期我会陆续出一下思科、H3C、锐捷等厂商的脚本，前期会分享简单的，单一的脚本，后面会分享复杂的脚本！

今天给大家分享20个常用的Python脚本，用于控制和管理华为路由器：

1、登录和退出路由器：

import telnetlibHOST = "192.168.1.1"
user = "admin"
password = "admin"tn = telnetlib.Telnet(HOST)tn.read_until(b"Username: ")
tn.write(user.encode('ascii') + b"\n")tn.read_until(b"Password: ")
tn.write(password.encode('ascii') + b"\n")tn.write(b"quit\n")

2、获取路由器的系统信息：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display version")for line in stdout:print(line.strip())client.close()

3、配置路由器端口：

import telnetlibHOST = "192.168.1.1"
user = "admin"
password = "admin"tn = telnetlib.Telnet(HOST)tn.read_until(b"Username: ")
tn.write(user.encode('ascii') + b"\n")tn.read_until(b"Password: ")
tn.write(password.encode('ascii') + b"\n")tn.write(b"system-view\n")
tn.write(b"interface GigabitEthernet0/0/1\n")
tn.write(b"ip address 192.168.2.1 255.255.255.0\n")
tn.write(b"quit\n")tn.write(b"quit\n")

4、查看路由器端口状态：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display interface GigabitEthernet0/0/1")for line in stdout:print(line.strip())client.close()

5、配置路由器的SNMP：

import telnetlibHOST = "192.168.1.1"
user = "admin"
password = "admin"tn = telnetlib.Telnet(HOST)tn.read_until(b"Username: ")
tn.write(user.encode('ascii') + b"\n")tn.read_until(b"Password: ")
tn.write(password.encode('ascii') + b"\n")tn.write(b"system-view\n")
tn.write(b"snmp-agent sys-info version all\n")
tn.write(b"snmp-agent community read public\n")
tn.write(b"snmp-agent target-host trap address udp-domain 192.168.2.2 params securityname public\n")
tn.write(b"quit\n")tn.write(b"quit\n")

6、配置路由器的ACL：

import telnetlibHOST = "192.168.1.1"
user = "admin"
password = "admin"tn = telnetlib.Telnet(HOST)tn.read_until(b"Username: ")
tn.write(user.encode('ascii') + b"\n")tn.read_until(b"Password: ")
tn.write(password.encode('ascii') + b"\n")tn.write(b"system-view\n")tn.write(b"acl number 2000\n")
tn.write(b"rule 5 permit source 192.168.2.0 0.0.0.255\n")
tn.write(b"quit\n")tn.write(b"interface GigabitEthernet0/0/1\n")
tn.write(b"ip address 192.168.2.1 255.255.255.0\n")
tn.write(b"traffic-filter inbound acl 2000\n")
tn.write(b"quit\n")tn.write(b"quit\n")

7、配置路由器的静态路由：

import telnetlibHOST = "192.168.1.1"
user = "admin"
password = "admin"tn = telnetlib.Telnet(HOST)tn.read_until(b"Username: ")
tn.write(user.encode('ascii') + b"\n")tn.read_until(b"Password: ")
tn.write(password.encode('ascii') + b"\n")tn.write(b"system-view\n")
tn.write(b"ip route-static 192.168.3.0 255.255.255.0 192.168.2.2\n")
tn.write(b"quit\n")tn.write(b"quit\n")

8、配置路由器的NAT：

import telnetlibHOST = "192.168.1.1"
user = "admin"
password = "admin"tn = telnetlib.Telnet(HOST)tn.read_until(b"Username: ")
tn.write(user.encode('ascii') + b"\n")tn.read_until(b"Password: ")
tn.write(password.encode('ascii') + b"\n")tn.write(b"system-view\n")
tn.write(b"interface GigabitEthernet0/0/0\n")
tn.write(b"nat enable\n")
tn.write(b"quit\n")tn.write(b"nat address-group 1 192.168.2.0 0.0.0.255\n")
tn.write(b"nat server protocol tcp global 202.96.209.5 inside 192.168.2.100 80\n")
tn.write(b"quit\n")tn.write(b"quit\n")

9、配置路由器的DHCP：

import telnetlibHOST = "192.168.1.1"
user = "admin"
password = "admin"tn = telnetlib.Telnet(HOST)tn.read_until(b"Username: ")
tn.write(user.encode('ascii') + b"\n")tn.read_until(b"Password: ")
tn.write(password.encode('ascii') + b"\n")tn.write(b"system-view\n")
tn.write(b"dhcp enable\n")
tn.write(b"interface GigabitEthernet0/0/1\n")
tn.write(b"dhcp server excluded-ip-address 192.168.2.1\n")
tn.write(b"dhcp server pool 1\n")
tn.write(b"network 192.168.2.0 mask 255.255.255.0\n")
tn.write(b"gateway-list 192.168.2.1\n")
tn.write(b"dns-list 8.8.8.8 8.8.4.4\n")
tn.write(b"quit\n")tn.write(b"quit\n")

10、查看路由器的ARP表：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display arp")
arp_table = stdout.readlines()for line in arp_table:print(line.strip())client.close()

11、查看路由器的MAC地址表：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display mac-address")
mac_table = stdout.readlines()for line in mac_table:print(line.strip())client.close()

12、查看路由器的路由表：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display ip routing-table")
route_table = stdout.readlines()for line in route_table:print(line.strip())client.close()

13、查看路由器的接口状态：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display interface brief")
interface_table = stdout.readlines()for line in interface_table:print(line.strip())client.close()

14、查看路由器的系统资源使用情况：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display system resource")
resource_info = stdout.readlines()for line in resource_info:print(line.strip())client.close()

15、查看路由器的系统版本：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display version")
version_info = stdout.readlines()for line in version_info:print(line.strip())client.close()

16、查看路由器的运行时间：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display clock")
clock_info = stdout.readlines()for line in clock_info:print(line.strip())client.close()

17、查看路由器的接口详细信息：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display interface")
interface_info = stdout.readlines()for line in interface_info:print(line.strip())client.close()

18、查看路由器的NAT转换表：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display nat session table")
nat_table = stdout.readlines()for line in nat_table:print(line.strip())client.close()

19、查看路由器的DNS服务器列表：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display dns server")
dns_info = stdout.readlines()for line in dns_info:print(line.strip())client.close()

20、查看路由器的DHCP服务器配置：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display dhcp server configuration")
dhcp_info = stdout.readlines()for line in dhcp_info:print(line.strip())client.close()

这些Python脚本可以帮助你快速查看华为路由器的各种信息，也可以作为开发的基础，进行更多高级的操作和自动化任务。

http://www.hkea.cn/news/361923/

相关文章：

  • 用java做的游戏下载网站有哪些内容成都网络推广优化
  • 慈溪市网站建设google官网
  • 网站建设计划seo网站排名优化软件是什么
  • 大连网站建设谁家好郴州网站定制
  • 网站建设背景怎么写一个企业该如何进行网络营销
  • 为女朋友做的表白网站百度大数据分析工具
  • 上海高端网站建设服务公seo推广公司
  • 找人合伙做网站平台仿站定制模板建站
  • 深圳市网站建设科技公司腾讯网网站网址
  • wordpress语言文件夹seo销售好做吗
  • 河北建设集团官网西安网站seo
  • 在外汇局网站做登记报告恢复原来的百度
  • 做外贸做的很好的网站全国疫情突然又严重了
  • 开发app需要什么样的团队百度seo优化培训
  • ftp上传网站之后软文什么意思范例
  • 询广西南宁网站运营推广系统
  • wordpress侧边栏小工具佛山网站优化
  • 用vs做网站原型企业培训课程有哪些内容
  • wordpress评论自定义百度刷排名seo
  • 四川建设网官网登录入口泉州seo外包
  • 网站有备案 去掉备案网络营销意思
  • 新建网站推广给企业百度问一问在线咨询客服
  • 曹鹏wordpress建站seo视频广东疫情防控措施
  • 网站开发的岗位排名优化工具
  • 岳阳做网站怎么做推广让别人主动加我
  • 不断改进网站建设公司百度官网优化
  • 万户网站宁波网站制作优化服务
  • 潍坊快速网站排名网站是怎么做出来的
  • 聚美优品的pc网站建设注册网址
  • 陕西省住房与城乡建设厅网站免费b站推广软件