当前位置: 首页 > news >正文

广州市财贸建设开发监理网站电脑培训机构

广州市财贸建设开发监理网站,电脑培训机构,wordpress设置关站,有哪些做ppt用图片的网站有哪些k8s pod访问集群外域名原理以及使用了systemd-resolved的不同情况 1、不同情况下的linux主机访问外部域名原理 没有使用systemd-resolved的linux主机上访问外部域名一般是按照以下步骤来的: 从dns缓存里查找域名与ip的映射关系 从/etc/hosts里查找域名与ip的映射…

k8s pod访问集群外域名原理以及使用了systemd-resolved的不同情况

1、不同情况下的linux主机访问外部域名原理

没有使用systemd-resolved的linux主机上访问外部域名一般是按照以下步骤来的:

  • 从dns缓存里查找域名与ip的映射关系

  • 从/etc/hosts里查找域名与ip的映射关系

  • 从/etc/resolv.conf里查找dns server,并发起解析请求

    /etc/resolv.conf的内容一般如下:
    nameserver 8.8.8.8

使用systemd-resolved的linux主机上访问外部域名一般是按照以下步骤来的:

  • 从dns缓存里查找域名与ip的映射关系

  • 从/etc/hosts里查找域名与ip的映射关系

  • 将dns解析请求发给本地systemd-resolved,由其去代理处理,因为systemd-resolved修改了 /etc/resolv.conf,使得本地解析请求全部发到127.0.0.1:53

    此时/etc/resolv.conf的内容一般如下:

# This file is managed by man:systemd-resolved(8). Do not edit.
#
# This is a dynamic resolv.conf file for connecting local clients to the
# internal DNS stub resolver of systemd-resolved. This file lists all
# configured search domains.
#
# Run "resolvectl status" to see details about the uplink DNS servers
# currently in use.
#
# Third party programs must not access this file directly, but only through the
# symlink at /etc/resolv.conf. To manage man:resolv.conf(5) in a different way,
# replace this symlink by a static file or a different symlink.
#
# See man:systemd-resolved.service(8) for details about the supported modes of
# operation for /etc/resolv.conf.nameserver 127.0.0.53
options edns0 trust-ad
  • 然后systemd-resolved再根据/run/systemd/resolve/resolv.conf里面的dns server去发起请求

    /run/systemd/resolve/resolv.conf记录的就是真正的后端dns server

cat /run/systemd/resolve/resolv.conf
# This file is managed by man:systemd-resolved(8). Do not edit.
#
# This is a dynamic resolv.conf file for connecting local clients directly to
# all known uplink DNS servers. This file lists all configured search domains.
#
# Third party programs must not access this file directly, but only through the
# symlink at /etc/resolv.conf. To manage man:resolv.conf(5) in a different way,
# replace this symlink by a static file or a different symlink.
#
# See man:systemd-resolved.service(8) for details about the supported modes of
# operation for /etc/resolv.conf.nameserver 8.8.8.8
nameserver 4.4.4.4

2、pod内访问集群内service域名

当pod启动的时候,一般用的是dnsPolicy: ClusterFirst,此时就会将pod的/etc/resolv.conf改为集群内coredns的地址,此时将解析请求发给coredns,由其代理处理:

集群内coredns的service ip:

kubectl get svc -n kube-systemNAME       TYPE        CLUSTER-IP   EXTERNAL-IP   PORT(S)                  AGE
kube-dns   ClusterIP   10.96.0.10   <none>        53/UDP,53/TCP,9153/TCP   14d

pod内的/etc/resolv.conf在启动的时候被指定dns server为coredns service ip:

# cat /etc/resolv.conf in pod
nameserver 10.96.0.10
search default.svc.cluster.local svc.cluster.local cluster.local
options ndots:5

3、pod内访问集群外service域名

  • 使用dnsPolicy: ClusterFirst时:

    pod内的/etc/resolv.conf在启动的时候被指定dns server为coredns service ip。
    coredns的默认配置如下,此时如果用在集群内找不到这个service域名,就会用forward去转发请求,此时默认配置的是使用coredns内的 /etc/resolv.conf文件里的dns server

coredns default config:

    .:53 {logerrorshealth {lameduck 5s}readykubernetes cluster.local in-addr.arpa ip6.arpa {pods insecurefallthrough in-addr.arpa ip6.arpattl 30}prometheus :9153forward . /etc/resolv.conf {max_concurrent 1000}cache 30loopreloadloadbalance}
  • 使用dnsPolicy: Default时:

    这种方式其实是让 kubelet 来决定使用何种 DNS 策略。而 kubelet 默认的方式,就是使用宿主机的 /etc/resolv.conf

    简述: pod将dns代理到coredns,coredns使用kubelet的resolv指定的conf里面的内容来解析集群外的ip

4、coredns pod内的/etc/resolv.conf为什么有时跟主机/etc/resolv.conf不一致

场景:

当主机使用systemd-resolved来代理dns解析请求的时候,此时coredns pod内的/etc/resolv.conf跟主机/etc/resolv.conf不一致。

coredns pod内的/etc/resolv.conf:

cat /run/systemd/resolve/resolv.conf
# This file is managed by man:systemd-resolved(8). Do not edit.
#
# This is a dynamic resolv.conf file for connecting local clients directly to
# all known uplink DNS servers. This file lists all configured search domains.
#
# Third party programs must not access this file directly, but only through the
# symlink at /etc/resolv.conf. To manage man:resolv.conf(5) in a different way,
# replace this symlink by a static file or a different symlink.
#
# See man:systemd-resolved.service(8) for details about the supported modes of
# operation for /etc/resolv.conf.nameserver 8.8.8.8
nameserver 4.4.4.4

主机/etc/resolv.conf:

# This file is managed by man:systemd-resolved(8). Do not edit.
#
# This is a dynamic resolv.conf file for connecting local clients to the
# internal DNS stub resolver of systemd-resolved. This file lists all
# configured search domains.
#
# Run "resolvectl status" to see details about the uplink DNS servers
# currently in use.
#
# Third party programs must not access this file directly, but only through the
# symlink at /etc/resolv.conf. To manage man:resolv.conf(5) in a different way,
# replace this symlink by a static file or a different symlink.
#
# See man:systemd-resolved.service(8) for details about the supported modes of
# operation for /etc/resolv.conf.nameserver 127.0.0.53
options edns0 trust-ad

coredns pod内的/etc/resolv.conf为什么有时跟主机/etc/resolv.conf不一致的原因:

coredns的pod使用的是dnsPolicy: Default,此时就会使用kubelet指定的resolvConf的地址,默认是/etc/resolv.conf,但是当主机使用了systemd-resolved,则kubelet的的resolvConf变成了:resolvConf: /run/systemd/resolve/resolv.conf,也就是systemd-resolved存放真实后端dns server的文件路径,所以其实coredns的pod使用的是/run/systemd/resolve/resolv.conf里的真实后端dns server

使用了systemd-resolved的主机,kubelet使用/run/systemd/resolve/resolv.conf,而不用/etc/resolv.conf的原因:

  • 如果coredns也是用/etc/resolv.conf,则集群里的dns解析请求都要代理到systemd-resolved,如果systemd-resolved挂了或者更新,那上层k8s集群里的dns解析也全部受到影响

  • 这里面会有循环依赖的问题,参考coredns的官方文档解析:

    Troubleshooting Loops In Kubernetes Clusters

    A common cause of forwarding loops in Kubernetes clusters is an interaction with a local DNS cache on the host node (e.g. systemd-resolved). For example, in certain configurations systemd-resolved will put the loopback address 127.0.0.53 as a nameserver into /etc/resolv.conf. Kubernetes (via kubelet) by default will pass this /etc/resolv.conf file to all Pods using the default dnsPolicy rendering them unable to make DNS lookups (this includes CoreDNS Pods). CoreDNS uses this /etc/resolv.conf as a list of upstreams to forward requests to. Since it contains a loopback address, CoreDNS ends up forwarding requests to itself.

    简述: coredns转到127.0.0.53,此时源目ip都是自己,自己在给自己转,就会有循环问题

5、在node上如何访问集群内的service域名

  • 通用方法:直接修改网卡interface的配置文件,在里面配上DNS的解析server

  • 不通用方法:linux没有使用systemd-resolved时:

    在/etc/resolv.conf里加入coredns的service ip

  • 不通用方法:linux使用systemd-resolved时:

    • 在/etc/systemd/resolved.conf里加入coredns的service ip
      [Resolve]
      DNS=10.96.0.10
      #FallbackDNS=
      #Domains=
      #LLMNR=no
      #MulticastDNS=no
      #DNSSEC=no
      #DNSOverTLS=no
      #Cache=no-negative
      #DNSStubListener=yes
      #ReadEtcHosts=yes
    • systemctl restart systemd-resolved.service
    • systemd-resolve --status查看结果
      Global
      LLMNR setting: no
      MulticastDNS setting: no
      DNSOverTLS setting: no
      DNSSEC setting: no
      DNSSEC supported: no
      DNS Servers: 10.96.0.10
      DNSSEC NTA: 10.in-addr.arpa
      16.172.in-addr.arpa
      168.192.in-addr.arpa
      17.172.in-addr.arpa
      18.172.in-addr.arpa
      19.172.in-addr.arpa
      20.172.in-addr.arpa
      21.172.in-addr.arpa

  • 注意:不可以直接改/etc/resolv.conf,否则重启后丢失配置,因为此时/etc/resolv.conf被systemd-resolved接管,每次重启由其来生成其中的内容

example:

# 指定使用coredns来解析集群内service:
root@:/home/ubuntu# nslookup vmselect-example-vmcluster-persistent.default.svc.cluster.local 10.96.0.10
Server:        10.96.0.10
Address:    10.96.0.10#53Name:    vmselect-example-vmcluster-persistent.default.svc.cluster.local
Address: 10.244.0.5
Name:    vmselect-example-vmcluster-persistent.default.svc.cluster.local
Address: 10.244.1.3
Name:    vmselect-example-vmcluster-persistent.default.svc.cluster.local
Address: 10.244.1.4# /etc/resolv.conf加入:
nameserver 10.96.0.10# node上直接访问集群内service域名,此时会转到coredns去解析
root@:/home/ubuntu# curl vmselect-example-vmcluster-persistent.default.svc.cluster.local:8481/metrics
...
flag{name="promscrape.suppressScrapeErrors", value="false", is_set="false"} 1
flag{name="promscrape.suppressScrapeErrorsDelay", value="0s", is_set="false"} 1
flag{name="promscrape.yandexcloudSDCheckInterval", value="30s", is_set="false"} 1
flag{name="pushmetrics.extraLabel", value="", is_set="false"} 1
flag{name="pushmetrics.interval", value="10s", is_set="false"} 1
flag{name="pushmetrics.url", value="secret", is_set="false"} 1
flag{name="replicationFactor", value="1", is_set="false"} 1
flag{name="search.cacheTimestampOffset", value="5m0s", is_set="false"} 1
flag{name="search.denyPartialResponse", value="false", is_set="false"} 1
...
...

6、使用了systemd-resolved的主机,如果关闭systemd-resolved则机器的dns解析都会不同,即使主机能通后端dns server

ubuntu@:~$ sudo systemctl stop systemd-resolved.service
ubuntu@:~$ nslookup www.baidu.com
^C
ubuntu@:~$ dig www.baidu.com
^C
ubuntu@:~$ host www.baidu.com
^C

7、主机如何修改dns server

  • 没有systemd-resolved,直接修改/etc/resolv.conf
  • 如果机器装了systemd-resolved,那么就不可以直接改/etc/resolv.conf,则改法如下:

以加上8.8.8.8为例

root@:/home/ubuntu# cat /etc/systemd/resolved.conf
#  This file is part of systemd.
#
#  systemd is free software; you can redistribute it and/or modify it
#  under the terms of the GNU Lesser General Public License as published by
#  the Free Software Foundation; either version 2.1 of the License, or
#  (at your option) any later version.
#
# Entries in this file show the compile time defaults.
# You can change settings by editing this file.
# Defaults can be restored by simply deleting this file.
#
# See resolved.conf(5) for details[Resolve]
DNS=8.8.8.8
#FallbackDNS=
#Domains=
#LLMNR=no
#MulticastDNS=no
#DNSSEC=no
#DNSOverTLS=no
#Cache=no-negative
#DNSStubListener=yes
#ReadEtcHosts=yessystemctl restart systemd-resolved.serviceroot@:/home/ubuntu# systemd-resolve --status
GlobalLLMNR setting: no
MulticastDNS setting: noDNSOverTLS setting: noDNSSEC setting: noDNSSEC supported: noDNS Servers: 8.8.8.8DNSSEC NTA: 10.in-addr.arpa16.172.in-addr.arpa168.192.in-addr.arpa17.172.in-addr.arpa18.172.in-addr.arpa19.172.in-addr.arpa20.172.in-addr.arpa21.172.in-addr.arpa......
http://www.hkea.cn/news/775256/

相关文章:

  • 外贸网站建设浩森宇特教育培训报名
  • 网站开发价目表深圳市前十的互联网推广公司
  • php做视频直播网站关键词竞价广告
  • 重庆怎么站seo深圳网络推广团队
  • 自学软件网站开发网络推广怎样做
  • 最新版的wordpress怎么添加特征图优化关键词的作用
  • 深圳做网站google推广网络营销和传统营销的区别和联系
  • 专业做网站的顺德公司网络推广怎么收费
  • php商城网站建设多少钱天津百度seo排名优化
  • 注册网站免费注册insseo关键词优化推广哪家好
  • 深圳房地产网站开发常见的网络营销工具有哪些
  • .net 网站管理系统湖南企业竞价优化首选
  • 南山区住房与建设局官方网站网络赚钱推广
  • wordpress mycred汉化seo引擎搜索入口
  • 在线教育网站用什么做百度搜索的优势
  • 甘肃省住房城乡建设厅网站首页智能建站模板
  • 智能科技网站模板下载地址百度学术论文查重
  • 网站要怎么做才能让360收录推广品牌的策划方案
  • 做网站前景营销课程培训视频
  • 青海做网站广告开户南京seo
  • wordpress写软文赚钱seo快速培训
  • 南宁网站建设接单陕西省人民政府
  • wordpress网站价格seo域名综合查询
  • 支付网站怎么做的网络自动推广软件
  • js做网站统计品牌关键词优化
  • 微信公众号管理平台官网谷歌seo建站
  • 鲜花购物网站源码企业网站营销的优缺点
  • 表白网站制作在线日照网站优化公司
  • 企业网站建设策划书 前言徐州关键词优化排名
  • 一级a做爰片视频网站全国新闻媒体发稿平台