uzi视频网站谁做的,免费做产品宣传的网站,宜良县建设局网站,用php做一网站有哪些东西提示#xff1a;文章写完后#xff0c;目录可以自动生成#xff0c;如何生成可参考右边的帮助文档 文章目录 Linux 单机1.官网下载 Elasticsearchhttps://www.elastic.co/cn/downloads/past-releases/#elasticsearch 2.解压软件3.创建用户设置用户 es 密码 es赋权ES用户数据… 提示文章写完后目录可以自动生成如何生成可参考右边的帮助文档 文章目录 Linux 单机1.官网下载 Elasticsearchhttps://www.elastic.co/cn/downloads/past-releases/#elasticsearch 2.解压软件3.创建用户设置用户 es 密码 es赋权ES用户数据日志文件夹所有者 4.修改配置文件4.1 修改/opt/soft/elasticsearch-6.8.23/config/elasticsearch.yml 文件版本7.0 以上版本 6.8.23 4.2 修改 /etc/security/limits.conf4.3 修改/etc/security/limits.d/20-nproc.conf4.4 修改/etc/sysctl.conf4.5 修改 /opt/es/elasticsearch-6.8.3/config 下文件 jvm.options 5.启动软件关闭防火墙 6.测试http://192.168.6.101:9200/http://192.168.6.101:9200/_cat/indices?v 开启密码访问1.配置elasticsearch.yml2.在 config 下生成 elastic-certificates.p12 文件如果有证书密码证书文件elastic-certificates.p12需拷贝到所有ES节点对应的conf目录下 3.重启ElasticSearch服务3台服务器都需要执行4.配置对外访问的用户名/密码自动或手工5.测试关闭防火墙账号elastic 密码刚输入的6位密码 Linux 单机
1.官网下载 Elasticsearch https://www.elastic.co/cn/downloads/past-releases/#elasticsearch 2.解压软件 tar -zxvf elasticsearch-6.8.23.tar.gz -C /opt/soft/3.创建用户
因为安全问题Elasticsearch 不允许 root 用户直接运行所以要创建新用户在 root 用户中创建新用户
useradd es #新增 es 用户
passwd es #为 es 用户设置密码
userdel -r es #如果错了可以删除再加
设置用户 es 密码 es 赋权ES用户
chown -R es:root /opt/soft/elasticsearch-6.8.23/ #文件夹所有者###创建es数据目录 并且赋权
mkdir -p /home/data/elastic-6.8.23
mkdir /home/data/elastic-6.8.23/data
mkdir /home/data/elastic-6.8.23/logs
mkdir /home/data/elastic-6.8.23/es_bak数据日志文件夹所有者
chown -R es:root /home/data/elastic-6.8.234.修改配置文件
4.1 修改/opt/soft/elasticsearch-6.8.23/config/elasticsearch.yml 文件
版本7.0 以上
# 加入如下配置
cluster.name: elasticsearch
node.name: node-1
network.host: 0.0.0.0
http.port: 9200
cluster.initial_master_nodes: [node-1]版本 6.8.23
# ---------------------------------- 6.8.23 -----------------------------------
#集群名称 my-application
cluster.name: gz-java-test-laas
#当前节点名称 node-1
node.name: master-test-laas
#允许当前节点作为master主节点
node.master: true#配置0.0.0.0允许其他地址访问
network.host: 0.0.0.0
#对外访问端口
http.port: 9200
transport.tcp.port: 9300#集群的所有节点的IP地址
#discovery.zen.ping.unicast.hosts: [172.16.1.21, 172.16.1.22, 172.16.1.23] #设置最小主节点个数一般为(master_node_count1)/2
discovery.zen.minimum_master_nodes: 1
#集群节点发现超时时间
#discovery.zen.ping_timeout: 3s # 设置zen发现范围只需要填写主节点的 ip 即可
discovery.zen.ping.unicast.hosts: [192.168.2.89]
discovery.zen.no_master_block: write
discovery.zen.fd.ping_timeout: 10sreindex.remote.whitelist: 192.168.2.89:9200# 设置跨域访问
http.cors.enabled: true
http.cors.allow-origin: *
http.max_content_length: 500mb# 设置数据路径
path.data: /home/data/elastic-6.8.23/data
# 设置日志路径
path.logs: /home/data/elastic-6.8.23/logs
# 设置备份路径
path.repo: [/home/data/elastic-6.8.23/es_bak]# 设置内存锁定
#bootstrap.memory_lock: true
#bootstrap.system_call_filter: false# 当磁盘的使用率超过95%时Elasticsearch为了防止节点耗尽磁盘空间自动将索引设置为只读模式
cluster.routing.allocation.disk.watermark.flood_stage: 90%
cluster.routing.allocation.disk.threshold_enabled: false#以下配置用于设置密码访问ES集群如不需要可以不用
xpack.security.enabled: true
xpack.license.self_generated.type: basic
xpack.security.transport.ssl.enabled: true
xpack.security.transport.ssl.verification_mode: certificate
xpack.security.transport.ssl.keystore.path: elastic-certificates.p12
xpack.security.transport.ssl.truststore.path: elastic-certificates.p12
4.2 修改 /etc/security/limits.conf
# 在文件末尾中增加下面内容
# 每个进程可以打开的文件数的限制
elasticsearch soft nofile 65535
elasticsearch hard nofile 655354.3 修改/etc/security/limits.d/20-nproc.conf
# 在文件末尾中增加下面内容
# 每个进程可以打开的文件数的限制
elasticsearch soft memlock unlimited
elasticsearch hard memlock unlimited
# 操作系统级别对每个用户创建的进程数的限制
* hard nproc 4096
# 注* 带表 Linux 所有用户名称elasticsearch soft nofile 65535
elasticsearch hard nofile 655354.4 修改/etc/sysctl.conf
# 在文件中增加下面内容
# 一个进程可以拥有的 VMA(虚拟内存区域)的数量,默认值为 65536
vm.max_map_count655360
fs.file-max65535 重新加载生效
sysctl -p4.5 修改 /opt/es/elasticsearch-6.8.3/config 下文件 jvm.options
内存设置大一点 ## JVM configuration################################################################
## IMPORTANT: JVM heap size
################################################################
##
## You should always set the min and max JVM heap
## size to the same value. For example, to set
## the heap to 4 GB, set:
##
## -Xms4g
## -Xmx4g
##
## See https://www.elastic.co/guide/en/elasticsearch/reference/current/heap-size.html
## for more information
##
################################################################# Xms represents the initial size of total heap space
# Xmx represents the maximum size of total heap space-Xms10g
-Xmx10g################################################################
## Expert settings
################################################################
##
## All settings below this section are considered
## expert settings. Dont tamper with them unless
## you understand what you are doing
##
################################################################## GC configuration
#-XX:UseConcMarkSweepGC
#-XX:CMSInitiatingOccupancyFraction75
#-XX:UseCMSInitiatingOccupancyOnly
-XX:UseG1GC## optimizations# pre-touch memory pages used by the JVM during initialization
-XX:AlwaysPreTouch## basic# explicitly set the stack size
-Xss1m# set to headless, just in case
-Djava.awt.headlesstrue# ensure UTF-8 encoding by default (e.g. filenames)
-Dfile.encodingUTF-8# use our provided JNA always versus the system one
-Djna.nosystrue# turn off a JDK optimization that throws away stack traces for common
# exceptions because stack traces are important for debugging
-XX:-OmitStackTraceInFastThrow# flags to configure Netty
-Dio.netty.noUnsafetrue
-Dio.netty.noKeySetOptimizationtrue
-Dio.netty.recycler.maxCapacityPerThread0# log4j 2
-Dlog4j.shutdownHookEnabledfalse
-Dlog4j2.disable.jmxtrue
#-Dlog4j2.formatMsgNoLookupstrue-Djava.io.tmpdir${ES_TMPDIR}## heap dumps# generate a heap dump when an allocation from the Java heap fails
# heap dumps are created in the working directory of the JVM
-XX:HeapDumpOnOutOfMemoryError# specify an alternative path for heap dumps; ensure the directory exists and
# has sufficient space
-XX:HeapDumpPathdata# specify an alternative path for JVM fatal error logs
-XX:ErrorFilelogs/hs_err_pid%p.log## JDK 8 GC logging8:-XX:PrintGCDetails
8:-XX:PrintGCDateStamps
8:-XX:PrintTenuringDistribution
8:-XX:PrintGCApplicationStoppedTime
8:-Xloggc:logs/gc.log
8:-XX:UseGCLogFileRotation
8:-XX:NumberOfGCLogFiles32
8:-XX:GCLogFileSize64m# JDK 9 GC logging
9-:-Xlog:gc*,gcagetrace,safepoint:filelogs/gc.log:utctime,pid,tags:filecount32,filesize64m
# due to internationalization enhancements in JDK 9 Elasticsearch need to set the provider to COMPAT otherwise
# time/date parsing will break in an incompatible way for some date patterns and locals
9-:-Djava.locale.providersCOMPAT# temporary workaround for C2 bug with JDK 10 on hardware with AVX-512
10-:-XX:UseAVX2
5.启动软件
使用 ES 用户启动
cd /opt/es/
#启动
bin/elasticsearch
#后台启动
bin/elasticsearch -d
启动时会动态生成文件bin/elasticsearch 报错 启动时会动态生成文件如果文件所属用户不匹配会发生错误需要重新进行修改用户和用户组 root 用户 再附权一下 chown -R es:es /opt/soft/elasticsearch-6.8.23/关闭防火墙
#暂时关闭防火墙
systemctl stop firewalld
#永久关闭防火墙
systemctl enable firewalld.service #打开放货抢永久性生效重启后不会复原
systemctl disable firewalld.service #关闭防火墙永久性生效重启后不会复原切换用户 ess
su es
#启动
bin/elasticsearch6.测试
如果配置没生效 可以重启
sudo reboothttp://192.168.6.101:9200/ http://192.168.6.101:9200/_cat/indices?v 开启密码访问
1.配置elasticsearch.yml
vim /data/elasticsearch-6.8.23/config/elasticsearch.yml#以下配置用于设置密码访问ES集群如不需要可以不用
xpack.security.enabled: true
xpack.license.self_generated.type: basic
xpack.security.transport.ssl.enabled: true
xpack.security.transport.ssl.verification_mode: certificate
xpack.security.transport.ssl.keystore.path: elastic-certificates.p12
xpack.security.transport.ssl.truststore.path: elastic-certificates.p12
2.在 config 下生成 elastic-certificates.p12 文件
cd /opt/soft/elasticsearch-6.8.23bin/elasticsearch-certutil cert -out config/elastic-certificates.p12 -pass 如果有证书密码
命令
elasticsearch-certutil cert -out elastic-certificates.p12 -pass 证书密码如果有证书密码配置证书密码
elasticsearch-keystore add xpack.security.transport.ssl.keystore.secure_password
elasticsearch-keystore add xpack.security.transport.ssl.truststore.secure_password证书文件elastic-certificates.p12需拷贝到所有ES节点对应的conf目录下 3.重启ElasticSearch服务3台服务器都需要执行
jps #查询ES服务进程号
kill -9 xxx #杀掉ES进程关闭服务chown -R es:es /opt/soft/elasticsearch-6.8.23 cd /data/elasticsearch-6.8.10/bin
./elasticsearch -d #启动服务4.配置对外访问的用户名/密码自动或手工
#自动设置密码
elasticsearch-setup-passwords auto#手动设置密码
bin/elasticsearch-setup-passwords interactive随后按照提示依次输入 以下这6个用户的密码完成后数据会自动同步至其他2个节点。
elasticapm_systemkibana、logstash_system、beats_system、remote_monitoring_user
5.测试
关闭防火墙
#暂时关闭防火墙
systemctl stop firewalld
#永久关闭防火墙
systemctl enable firewalld.service #打开放货抢永久性生效重启后不会复原
systemctl disable firewalld.service #关闭防火墙永久性生效重启后不会复原http://192.168.2.89:9200/ http://192.168.2.89:9200/_cat/indices?v 账号elastic 密码刚输入的6位密码
