楚雄企业网站建设公司,汽车网站建设论文,门户网站的建设和管理情况自查,微信运营公司文章目录1. 前言2. i2c-dev驱动的注册过程3. open_i2c_dev函数分析4. set_slave_addr函数分析5. i2c_read_bytes函数分析1. 前言
前面分析i2c-tool测试工具就是基于drivers/i2c/i2c-dev.c驱动来实现的。i2c-dev驱动在加载时会遍历所有的I2C总线(i2c_bus_type)上所有注册的adap…
文章目录1. 前言2. i2c-dev驱动的注册过程3. open_i2c_dev函数分析4. set_slave_addr函数分析5. i2c_read_bytes函数分析1. 前言
前面分析i2c-tool测试工具就是基于drivers/i2c/i2c-dev.c驱动来实现的。i2c-dev驱动在加载时会遍历所有的I2C总线(i2c_bus_type)上所有注册的adapter并且在linux系统创建对应的字符设备如/dev/i2c-0、/dev/i2c-1、/dev/i2c-2等。应用程序通过open打开对应的i2c字符设备通过ioctl来收发数据。具体的架构如下图
2. i2c-dev驱动的注册过程
在i2c-dev.c的驱动入口i2c_dev_init函数具体操作如下
register_chrdev_region注册i2c字符设备class_create创建i2c-dev的class为在linux文件系统中创建字符设备做准备。i2cdev_attach_adapter通过函数i2c_for_each_dev遍历已经绑定的adapter有多少个adapter就调用i2cdev_attach_adapter函数几次。 to_i2c_adapter通过dev获取对应的i2c adapter。cdev_init它会初始化一个重要的结构体file_operations。dev_set_name设置device name为i2c-x也就是我们在字符设备创建成功后看到的/dev/i2c-x设备。cdev_device_add添加设备到系统并且创建对应的字符设备到用户空间。 备注 cdev_device_add这里其实调用了cdev_add和device_add。然而device_create()是device_register()的封装而device_register()则是device_add()的封装。 3. open_i2c_dev函数分析
open_i2c_dev是i2c-tool工具open i2c-dev驱动的函数根据传递的参数最终重要函数应该如下 file open(/dev/i2c-0, O_RDWR); 该函数的主要代码如下
/* File Path i2c-tools-4.3/tools/i2cbusses.c */
int open_i2c_dev(int i2cbus, char *filename, size_t size, int quiet)
{int file, len;len snprintf(filename, size, /dev/i2c/%d, i2cbus);if (len (int)size) {fprintf(stderr, %s: path truncated\n, filename);return -EOVERFLOW;}file open(filename, O_RDWR);if (file 0 (errno ENOENT || errno ENOTDIR)) {len snprintf(filename, size, /dev/i2c-%d, i2cbus);if (len (int)size) {fprintf(stderr, %s: path truncated\n, filename);return -EOVERFLOW;}file open(filename, O_RDWR);}...return file;
}应用层调用open后会对应调用i2c-dev通用驱动的open函数。主要是如下几个步骤
to_i2c_adapter通过minor次设备号其实这里等同于i2c总线编号。通过它来获取对应总线的adapter。kzalloc申请一个i2c client表示I2C设备并且初始化该client的name和保存adapter与其建立联系。但是整个open函数这里没有对I2C地址进行初始化。file-private_data通过private_data保存申请的client地址为了后面read/write/ioctl可以通过file-private_data很方便的拿到当前dev的client。
/* File Path kernel/drivers/i2c/i2c-dev.c */
static int i2cdev_open(struct inode *inode, struct file *file)
{unsigned int minor iminor(inode);struct i2c_client *client;struct i2c_adapter *adap;adap i2c_get_adapter(minor);if (!adap)return -ENODEV;/* This creates an anonymous i2c_client, which may later be* pointed to some address using I2C_SLAVE or I2C_SLAVE_FORCE.** This client is ** NEVER REGISTERED ** with the driver model* or I2C core code!! It just holds private copies of addressing* information and maybe a PEC flag.*/client kzalloc(sizeof(*client), GFP_KERNEL);if (!client) {i2c_put_adapter(adap);return -ENOMEM;}snprintf(client-name, I2C_NAME_SIZE, i2c-dev %d, adap-nr);client-adapter adap;file-private_data client;return 0;
}
4. set_slave_addr函数分析
open_i2c_dev是i2c-tool工具来设置I2C的设备地址。具体代码如下
/* File Path i2c-tools-4.3/tools/i2cbusses.c */
int set_slave_addr(int file, int address, int force)
{/* With force, let the user read from/write to the registerseven when a driver is also running */if (ioctl(file, force ? I2C_SLAVE_FORCE : I2C_SLAVE, address) 0) {fprintf(stderr,Error: Could not set address to 0x%02x: %s\n,address, strerror(errno));return -errno;}return 0;
}
应用层调用ioctl I2C_SLAVE_FORCE后会对应调用i2c-dev通用驱动对应的ioctl I2C_SLAVE_FORCE。主要是如下2个步骤
client file-private_data从private_data中获取当前I2C设备。client-addr arg设置当前I2C设备的地址信息方便后面的read/write操作I2C设备。
/* File Path kernel/drivers/i2c/i2c-dev.c */
static long i2cdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{struct i2c_client *client file-private_data;unsigned long funcs;switch (cmd) {case I2C_SLAVE:case I2C_SLAVE_FORCE:if ((arg 0x3ff) ||(((client-flags I2C_M_TEN) 0) arg 0x7f))return -EINVAL;if (cmd I2C_SLAVE i2cdev_check_addr(client-adapter, arg))return -EBUSY;/* REVISIT: address could become busy later */client-addr arg;return 0;...
}5. i2c_read_bytes函数分析
i2c_read_bytes这个函数是我自己写的demo code这里只列了read部分来分析完整的demo code可以查看上一篇我的博客。主要是如下2个步骤
struct i2c_msg messages[2]定义2个i2c_msg的消息体并且初始化它。它包含了I2C的从机设备地址、read/write的flag、数据的长度、存放数据的地址。msg[0]主要是为了发送需要读取从机的哪个寄存器msg[1]主要的配置读取的数据长度的和存放数据的地址。struct i2c_rdwr_ioctl_data packets它主要是存放i2c_msg消息地址和i2c_msg消息个数。ioctl通过ioctl发送到内核。
static int i2c_read_bytes(int fd, uint8_t slave_addr, uint8_t reg_addr, uint8_t *values, uint8_t len)
{uint8_t outbuf[1];struct i2c_rdwr_ioctl_data packets;struct i2c_msg messages[2];outbuf[0] reg_addr;messages[0].addr slave_addr;messages[0].flags 0;messages[0].len sizeof(outbuf);messages[0].buf outbuf;/* The data will get returned in this structure */messages[1].addr slave_addr;messages[1].flags I2C_M_RD/* | I2C_M_NOSTART*/;messages[1].len len;messages[1].buf values;/* Send the request to the kernel and get the result back */packets.msgs messages;packets.nmsgs 2;if(ioctl(fd, I2C_RDWR, packets) 0){printf(Error: Unable to send data);return -1;}return 0;
}应用层调用ioctl I2C_RDWR后会对应调用i2c-dev通用驱动对应的ioctl I2C_RDWR。它将应用层的数据到拷贝的内核具体如下
/* File Path kernel/drivers/i2c/i2c-dev.c */
case I2C_RDWR: {struct i2c_rdwr_ioctl_data rdwr_arg;struct i2c_msg *rdwr_pa;//从用户空间拷贝数据到内核空间copy_from_user(rdwr_arg,(struct i2c_rdwr_ioctl_data __user *)arg,sizeof(rdwr_arg));//分配一块内存空间将用户空间的数据拷贝进去rdwr_pa memdup_user(rdwr_arg.msgs, rdwr_arg.nmsgs * sizeof(struct i2c_msg));return i2cdev_ioctl_rdwr(client, rdwr_arg.nmsgs, rdwr_pa);
}static int i2cdev_ioctl_rdwr(struct i2c_client *client, unsigned nmsgs, struct i2c_msg *msgs)
{***res i2c_transfer(client-adapter, msgs, nmsgs);***
}总结其实应用层初始化的i2c_msg就是直接给内核i2c_transfer将I2C消息发送出去的。
