企业外部网站建设,成都工业设计公司排名,应用网站模板,专业做曝光引流网站9.4.1 IGMPv1
实验目的
熟悉IGMPv1的应用场景掌握IGMPv1的配置方法实验拓扑
实验拓扑如图9-7所示#xff1a; 图9-7#xff1a;IGMPv1
实验步骤
#xff08;1#xff09;配置IP地址
MCS1的配置
MCS1的IP地址配置如图9-8所示#xff1a; 图9-8#xff1a;MCS1的配置
…9.4.1 IGMPv1
实验目的
熟悉IGMPv1的应用场景掌握IGMPv1的配置方法实验拓扑
实验拓扑如图9-7所示 图9-7IGMPv1
实验步骤
1配置IP地址
MCS1的配置
MCS1的IP地址配置如图9-8所示 图9-8MCS1的配置
MCS1的组播地址配置如图9-9所示 图9-9MCS1组播地址的配置
R1的配置
Huaweisystem-view
Enter system view, return user view with CtrlZ.
[Huawei]undo info-center enable
Info: Information center is disabled.
[Huawei]sysname R1
[R1]interface g0/0/0
[R1-GigabitEthernet0/0/0]ip address 192.168.1.1 24
[R1-GigabitEthernet0/0/0]quit
[R1]interface g0/0/1
[R1-GigabitEthernet0/0/1]ip address 12.1.1.1 24
[R1-GigabitEthernet0/0/1]quit
[R1]interface g0/0/2
[R1-GigabitEthernet0/0/2]ip address 13.1.1.1 24
[R1-GigabitEthernet0/0/2]quit
R2的配置
Huaweisystem-view
Enter system view, return user view with CtrlZ.
[Huawei]undo info-center enable
Info: Information center is disabled.
[Huawei]sysname R2
[R2]interface g0/0/2
[R2-GigabitEthernet0/0/2]ip address 12.1.1.2 24
[R2-GigabitEthernet0/0/2]quit
[R2]interface g0/0/0
[R2-GigabitEthernet0/0/0]ip address 10.1.1.252 24
[R2-GigabitEthernet0/0/0]quit
R3的配置
Huaweisystem-view
Enter system view, return user view with CtrlZ.
[Huawei]undo info-center enable
Info: Information center is disabled.
[Huawei]sysname R3
[R3]interface g0/0/3
[R3-GigabitEthernet0/0/3]ip address 13.1.1.3 24
[R3-GigabitEthernet0/0/3]quit
[R3]interface g0/0/0
[R3-GigabitEthernet0/0/0]ip address 10.1.1.253 24
[R3-GigabitEthernet0/0/0]quit
PC1的配置
PC1的IP地址的配置如图9-10所示 图9-10配置PC1的IP地址 PC2的配置
PC2的IP地址配置如图9-11所示 图9-11配置PC2的IP地址
PC3的配置
PC3的IP地址配置如图9-12所示 图9-12配置PC3的IP地址
2运行IGP
R1的配置
[R1]ospf router-id 1.1.1.1
[R1-ospf-1]area 0
[R1-ospf-1-area-0.0.0.0]network 192.168.1.0 0.0.0.255
[R1-ospf-1-area-0.0.0.0]network 12.1.1.0 0.0.0.255
[R1-ospf-1-area-0.0.0.0]network 13.1.1.0 0.0.0.255
[R1-ospf-1-area-0.0.0.0]quit
R2的配置
[R2]ospf router-id 2.2.2.2
[R2-ospf-1]area 0
[R2-ospf-1-area-0.0.0.0]network 12.1.1.0 0.0.0.255
[R2-ospf-1-area-0.0.0.0]network 10.1.1.0 0.0.0.255
[R2-ospf-1-area-0.0.0.0]quit
R3的配置
[R3]ospf router-id 3.3.3.3
[R3-ospf-1]area 0
[R3-ospf-1-area-0.0.0.0]network 13.1.1.0 0.0.0.255
[R3-ospf-1-area-0.0.0.0]network 10.1.1.0 0.0.0.255
[R3-ospf-1-area-0.0.0.0]quit 3运行PIM-DM
R1的配置 [R1]multicast routing-enable
[R1]interface g0/0/0
[R1-GigabitEthernet0/0/0]pim dm
[R1-GigabitEthernet0/0/0]quit
[R1]interface g0/0/1
[R1-GigabitEthernet0/0/1]pim dm
[R1-GigabitEthernet0/0/1]quit
[R1]interface g0/0/2
[R1-GigabitEthernet0/0/2]pim dm
[R1-GigabitEthernet0/0/2]quit R2的配置
[R2]multicast routing-enable
[R2]interface g0/0/2
[R2-GigabitEthernet0/0/2]pim dim
[R2-GigabitEthernet0/0/2]quit
[R2]interface g0/0/0
[R2-GigabitEthernet0/0/0]pim dm
[R2-GigabitEthernet0/0/0]quit
R3的配置
[R3]multicast routing-enable
[R3]interface g0/0/3
[R3-GigabitEthernet0/0/3]pim dm
[R3-GigabitEthernet0/0/3]quit
[R3]interface g0/0/0
[R3-GigabitEthernet0/0/0]pim dm
[R3-GigabitEthernet0/0/0]quit 4运行IGMP V1
R2的配置
[R2]interface g0/0/0
[R2-GigabitEthernet0/0/0]igmp enable
[R2-GigabitEthernet0/0/0]igmp version 1
[R2-GigabitEthernet0/0/0]quit
R3的配置
[R3]interface g0/0/0
[R3-GigabitEthernet0/0/0]igmp enable
[R3-GigabitEthernet0/0/0]igmp version 1
[R3-GigabitEthernet0/0/0]quit 实验调试
1查看IGMP的接口信息
[R2]display igmp interface
Interface information of VPN-Instance: public net GigabitEthernet0/0/0(10.1.1.252): IGMP is enabled Current IGMP version is 1 //版本为1 IGMP state: up IGMP group policy: none IGMP limit: - Value of query interval for IGMP (negotiated): - Value of query interval for IGMP (configured): 60 s //查询间隔时间为60s Value of other querier timeout for IGMP: 0 s Value of maximum query response time for IGMP: -最大查询响应时间不能设置为10s Querier for IGMP: 10.1.1.253 //查询路由器优选IP地址最大的 Total 1 IGMP Group reported
【技术要点1】查询器的选举原则机制
1、依赖PIM选举接口IP地址大的路由器
2、只有查询器才会发送general query
3、查询器与非查询器均能收到报告报文生成IGMP表项
华为Datacom网络工程师HCIP全套学习课程全套理论实验-学习视频教程-腾讯课堂 (2)在R2上打开调试信息
R2debugging igmp report
R2debugging igmp event
R2debugging igmp leave
R2terminal monitor
R2terminal debugging
[R2]info-center enable 3 在PC1上点击加入组播224.1.1.1配置如图9-13所示 图9-13配置PC1加入组播224.1.1.1
4在R2上显示的信息
R2
Jun 30 2022 17:04:08.880.1-08:00 R2 IGMP/7/REPORT:(public net): Received v1 report for group 224.1.1.1 on interface GigabitEthernet0/0/0(10.1.1.252) (G081904) 5查看组成员信息
R2display igmp group
Interface group report information of VPN-Instance: public net GigabitEthernet0/0/0(10.1.1.252): Total 1 IGMP Group reported Group Address Last Reporter Uptime Expires 224.1.1.1 10.1.1.1 00:27:48 00:02:03 6在R2的g0/0/0处抓包
第一个包membership query它的报文结构如图9-14所示 图9-14membership query包文结构
第二个包membership report它的包文结构如图9-15所示 图9-15membership report包文结构
