本文参加新星计划人工智能(Pytorch)赛道：https://bbs.csdn.net/topics/613989052

引言

本文主要内容如下：

• 简述网格上的位置编码
• 参考点云上的Transformer-¹:PCT:Point cloud transformer，构造网格分类网络

一、概述

个人认为对于三角形网格来说，想要将Transformer应用到其上较为重要的一步是位置编码。三角网格在3D空间中如何编码每一个元素的位置，能尽可能保证的泛化性能? 以xyz坐标为例，最好是模型经过对齐的预处理，使朝向一致。或者保证网格水密的情况下使用谱域特征，如热核特征。或者探索其他位置编码等等… 上图为一个外星人x坐标的位置编码可视化

• 使用简化网格每一个面直接作为一个Token即可，高分辨率的网格(考虑输入特征计算、训练数据对齐等)并不适合深度学习(个人认为)
• 直接应用现有的Tranformer网络框架、自注意力模块等，细节或参数需要微调

二、核心代码

2.1 位置编码

使用每一个网格面的中心坐标作为位置编码，计算代码在DataLoader中：

• 需要平移到坐标轴原点，并进行尺度归一化

# xyz
xyz_min = np.min(vs[:, 0:3], axis=0)
xyz_max = np.max(vs[:, 0:3], axis=0)
xyz_move = xyz_min + (xyz_max - xyz_min) / 2
vs[:, 0:3] = vs[:, 0:3] - xyz_move
# scale
scale = np.max(vs[:, 0:3])
vs[:, 0:3] = vs[:, 0:3] / scale
# 面中心坐标
xyz = []
for i in range(3):xyz.append(vs[faces[:, i]])
xyz = np.array(xyz)  # 转为np
mean_xyz = xyz.sum(axis=0) / 3

2.2 网络框架

• 参考上图PCT框架，修改了部分细节，如减少了Attention模块数量等

• 参考上图自注意力模块，个人感觉图中应该有误. 从一个共享权重的Linear里出来了$Q、K、V$三个矩阵，但$V$的维度和$Q、K$不一致，少画了一个Linear?

class SA(nn.Module):def __init__(self, channels):super().__init__()self.q_conv = nn.Conv1d(channels, channels // 4, 1, bias=False)self.k_conv = nn.Conv1d(channels, channels // 4, 1, bias=False)self.q_conv.weight = self.k_conv.weightself.v_conv = nn.Conv1d(channels, channels, 1, bias=False)self.trans_conv = nn.Conv1d(channels, channels, 1)self.after_norm = nn.BatchNorm1d(channels)self.act = nn.GELU()self.softmax = nn.Softmax(dim=-1)def forward(self, x):x_q = self.q_conv(x).permute(0, 2, 1)x_k = self.k_conv(x)x_v = self.v_conv(x)energy = x_q @ x_kattention = self.softmax(energy)attention = attention / (1e-9 + attention.sum(dim=1, keepdims=True))x_r = x_v @ attentionx_r = self.act(self.after_norm(self.trans_conv(x - x_r)))x = x + x_rreturn xclass TriTransNet(nn.Module):def __init__(self, dim_in, classes_n=30):super().__init__()self.conv_fea = FaceConv(6, 128, 4)self.conv_pos = FaceConv(3, 128, 4)self.bn_fea = nn.BatchNorm1d(128)self.bn_pos = nn.BatchNorm1d(128)self.sa1 = SA(128)self.sa2 = SA(128)self.gp = nn.AdaptiveAvgPool1d(1)self.linear1 = nn.Linear(256, 128, bias=False)self.bn1 = nn.BatchNorm1d(128)self.linear2 = nn.Linear(128, classes_n)self.act = nn.GELU()def forward(self, x, mesh):x = x.permute(0, 2, 1).contiguous()# 位置编码 放到DataLoader中比较好pos = [m.xyz for m in mesh]pos = np.array(pos)pos = torch.from_numpy(pos).float().to(x.device).requires_grad_(True)batch_size, _, N = x.size()x = self.act(self.bn_fea(self.conv_fea(x, mesh).squeeze(-1)))pos = self.act(self.bn_pos(self.conv_pos(pos, mesh).squeeze(-1)))x1 = self.sa1(x + pos)x2 = self.sa2(x1 + pos)x = torch.cat((x1, x2), dim=1)x = self.gp(x)x = x.view(batch_size, -1)x = self.act(self.bn1(self.linear1(x)))x = self.linear2(x)return x

三、基于Transformer的网格分类

数据集是SHREC’11 可参考三角网格(Triangular Mesh)分类数据集 或 MeshCNN

3.1 分类结果

准确率太低… 可以尝试改进的点：

• 尝试不同的位置编码(谱域特征)，不同的位置嵌入方式 (sum可改为concat)
• 数据集较小的情况下Transformer略难收敛，加入更多CNN可加速且提升明显 (或者加入降采样)
• 打印loss进行分析，是否欠拟合，尝试增加网络参数？

基于Transformer的网络在网格分割上的表现会很好，仅用少量参数即可媲美甚至超过基于面卷积的分割结果，个人感觉得益于其近乎全局的感受野…

3.2 全部代码

DataLoader代码请参考²:从零开始网格上的深度学习-1:输入篇(Pytorch)
FaceConv代码请参考³:从零开始网格上的深度学习-2:卷积网络CNN篇

import torch
import torch.nn as nn
import numpy as np
from CNN import FaceConv
from DataLoader_shrec11 import DataLoader
from DataLoader_shrec11 import Meshclass SA(nn.Module):def __init__(self, channels):super().__init__()self.q_conv = nn.Conv1d(channels, channels // 4, 1, bias=False)self.k_conv = nn.Conv1d(channels, channels // 4, 1, bias=False)self.q_conv.weight = self.k_conv.weightself.v_conv = nn.Conv1d(channels, channels, 1, bias=False)self.trans_conv = nn.Conv1d(channels, channels, 1)self.after_norm = nn.BatchNorm1d(channels)self.act = nn.GELU()self.softmax = nn.Softmax(dim=-1)def forward(self, x):x_q = self.q_conv(x).permute(0, 2, 1)x_k = self.k_conv(x)x_v = self.v_conv(x)energy = x_q @ x_kattention = self.softmax(energy)attention = attention / (1e-9 + attention.sum(dim=1, keepdims=True))x_r = x_v @ attentionx_r = self.act(self.after_norm(self.trans_conv(x - x_r)))x = x + x_rreturn xclass TriTransNet(nn.Module):def __init__(self, dim_in, classes_n=30):super().__init__()self.conv_fea = FaceConv(6, 128, 4)self.conv_pos = FaceConv(3, 128, 4)self.bn_fea = nn.BatchNorm1d(128)self.bn_pos = nn.BatchNorm1d(128)self.sa1 = SA(128)self.sa2 = SA(128)self.gp = nn.AdaptiveAvgPool1d(1)self.linear1 = nn.Linear(256, 128, bias=False)self.bn1 = nn.BatchNorm1d(128)self.linear2 = nn.Linear(128, classes_n)self.act = nn.GELU()def forward(self, x, mesh):x = x.permute(0, 2, 1).contiguous()# 位置编码 放到DataLoader中比较好pos = [m.xyz for m in mesh]pos = np.array(pos)pos = torch.from_numpy(pos).float().to(x.device).requires_grad_(True)batch_size, _, N = x.size()x = self.act(self.bn_fea(self.conv_fea(x, mesh).squeeze(-1)))pos = self.act(self.bn_pos(self.conv_pos(pos, mesh).squeeze(-1)))x1 = self.sa1(x + pos)x2 = self.sa2(x1 + pos)x = torch.cat((x1, x2), dim=1)x = self.gp(x)x = x.view(batch_size, -1)x = self.act(self.bn1(self.linear1(x)))x = self.linear2(x)return xif __name__ == '__main__':# 输入data_train = DataLoader(phase='train')         # 训练集data_test = DataLoader(phase='test')           # 测试集print('#train meshes = %d' % len(data_train)) # 输出训练模型个数print('#test  meshes = %d' % len(data_test))  # 输出测试模型个数# 网络net = TriTransNet(data_train.input_n, data_train.class_n)    # 创建网络 以及 优化器optimizer = torch.optim.Adam(net.parameters(), lr=0.001, betas=(0.9, 0.999))net = net.cuda(0)loss_fun = torch.nn.CrossEntropyLoss(ignore_index=-1)num_params = 0for param in net.parameters():num_params += param.numel()print('[Net] Total number of parameters : %.3f M' % (num_params / 1e6))print('-----------------------------------------------')# 迭代训练for epoch in range(1, 201):print('---------------- Epoch: %d -------------' % epoch)for i, data in enumerate(data_train):# 前向传播net.train(True)        # 训练模式optimizer.zero_grad()  # 梯度清零face_features = torch.from_numpy(data['face_features']).float()face_features = face_features.to(data_train.device).requires_grad_(True)labels = torch.from_numpy(data['label']).long().to(data_train.device)out = net(face_features, data['mesh'])     # 输入到网络# 反向传播loss = loss_fun(out, labels)loss.backward()optimizer.step()              # 参数更新# 测试net.eval()acc = 0for i, data in enumerate(data_test):with torch.no_grad():# 前向传播face_features = torch.from_numpy(data['face_features']).float()face_features = face_features.to(data_test.device).requires_grad_(False)labels = torch.from_numpy(data['label']).long().to(data_test.device)out = net(face_features, data['mesh'])# 计算准确率pred_class = out.data.max(1)[1]correct = pred_class.eq(labels).sum().float()acc += correctacc = acc / len(data_test)print('epoch: %d, TEST ACC: %0.2f' % (epoch, acc * 100))

---

1. PCT:Point cloud transformer ↩︎

2. 从零开始网格上的深度学习-1:输入篇(Pytorch) ↩︎

3. 从零开始网格上的深度学习-2:卷积网络CNN篇 ↩︎